Exterior House Painting
Exterior painting that protects North Shore homes from sun, rain and salt air, on any surface.
Explore service →
Service
Careful painting of timber window frames, sashes and reveals so they seal properly and look sharp inside and out.
Window Painting Specialists
For Window Painting North Shore, careful preparation, a suitable coating system and a clearly defined quotation shape the project.
A window frame faces the weather on its outside edge while also being one of the more visible details on the inside of a room, which means it needs a finish that holds up outdoors and still looks sharp up close. Timber sashes and frames move slightly with humidity and temperature, and paint that isn't applied or prepared correctly can crack along these moving joints or, worse, seal a window shut.
Our window painting service covers timber sashes, frames and reveals, both the external face and the internal side facing into the room. Careful masking keeps paint off the glass and hardware, and sashes are eased during the process so windows keep opening and closing freely once the paint has cured.
Whether it's a single window that's started to peel, or every window through a home that's due for attention, the aim is a clean, weather-resistant finish that doesn't compromise how the window actually works.
Who this is for: This service suits homeowners with peeling or flaking timber window frames, dated or mismatched window trim, timber sash windows that stick or show bare timber, and anyone wanting window painting as a standalone job or as part of a broader repaint.
A quick look at what's covered when you book this service.
We assess the frames, sashes and reveals to be painted, checking condition and identifying any areas of concern before starting. This informs how much preparation each window needs and what primer will suit the timber's condition.
Glass and adjoining surfaces are carefully masked before painting begins, keeping paint off panes and nearby trim. This careful setup is what produces the sharp, clean lines that separate a professional job from a rushed one.
Failed or flaking paint is scraped and sanded back to a sound edge before new coating goes on. This preparation step prevents the new paint from lifting again in the same spots shortly after application.
Minor glazing putty repairs are addressed where needed alongside the paintwork, since cracked or missing putty is a common issue on older windows. Fixing this helps the window seal properly against weather.
An appropriate primer is chosen for bare or weathered timber, giving the topcoat a stable surface to bond to. Matching primer to the frame's actual condition helps prevent early peeling on exposed exterior faces.
Two coats are applied in your chosen sheen for durable, even coverage on both interior and exterior faces. This layered approach holds up better to weather exposure than a single thin coat.
Sashes are eased during the process so windows keep opening and closing freely once the paint has fully cured. This step prevents the common DIY mistake of accidentally painting a window shut.
We check lines, coverage and window operation before considering the job complete, confirming everything opens and closes smoothly. This final review ensures the windows look sharp and still function exactly as they should.
Here's what to expect from your first enquiry through to the final coat.
We look at the windows involved, discuss colour and sheen options, and provide a written quote for the scope of work.
Glass and hardware are masked, failed paint is scraped and sanded back, and any minor glazing putty repairs are addressed.
Primer is applied where required, followed by two coats in the chosen finish, with sashes eased so they keep moving freely.
We check lines, coverage and sheen, confirm windows open and close smoothly, and address any final touch-ups.
A few of the things we weigh up when choosing the right product for this job.
Exterior-grade enamels suit frames facing the weather, even on the face painted from indoors, since the whole frame experiences that outdoor exposure over time. A standard interior paint on a window frame risks failing sooner on the weather-facing side.
Flexible coatings move with timber through seasonal swelling and contraction, reducing the risk of cracking at joints between sashes and frames. This matters more on windows than most surfaces, given how much timber sashes move with humidity.
Careful technique keeps paint off glazing and hardware for a clean finish, since hardened paint on glass is difficult to remove without risking scratches. Getting the masking and cutting-in right the first time avoids this problem entirely.
Correct primer selection matters for bare or previously bare timber frames, giving the topcoat a stable surface to bond to rather than absorbing unevenly. This step is especially important on older windows that have weathered over many years.
Satin or semi-gloss finishes are common for a clean, easy-to-wipe reveal, since window sills and reveals pick up dust and condensation more than open wall areas. This practical durability matters alongside how the finish looks.
Matt or satin finishes on internal reveals reduce glare compared with higher-sheen options, which can matter in rooms that get strong natural light through the window itself. This is a small detail worth considering alongside your main colour choice.
What to expect in terms of timing and access while the work is underway.
Window painting can mean affected windows stay closed or propped during drying, and rooms with masking or sheeting around the window may be slightly restricted for a short time. Exterior window work is weather-dependent, so scheduling can shift around suitable dry conditions.

A few reasons homeowners and property managers choose not to DIY this job.
Painting a window shut is a common DIY mistake, caused by coating over the moving joint between sash and frame without easing it afterwards. We work sashes during the process so windows keep operating freely once the paint has cured.
Careful masking keeps paint off glazing and hardware, leaving a sharp, clean line where the frame meets the pane. Hardened paint on glass is difficult to remove without risking scratches, so getting the masking right the first time matters.
Weathered or previously bare timber frames need the right primer to take paint properly and resist early peeling. We assess the condition of each frame and prepare it accordingly, rather than assuming every window needs the same treatment.
Window frame colour needs to sit consistently with surrounding trim and walls, or it can look like an afterthought against the rest of the room or facade. We match colours carefully so frames blend into your overall scheme.
Upper-storey windows need proper ladders or access equipment to reach safely, rather than awkward stretching from an unstable position. We come equipped for the height involved so every window gets the same careful attention.
Cracked or deteriorating glazing putty is a common issue alongside failing window paint, and we can generally address minor repairs as part of the job. Flagging and fixing this early helps the window seal and perform properly again.
Straight answers to the questions we're asked most often about window painting.
Yes, glass and hardware are carefully masked before painting begins so you're left with clean, sharp lines against the panes.
They should - we ease sashes during the process so paint doesn't bridge and seal a window shut, and we check operation again once the coating has cured.
Minor glazing putty repairs can usually be included, though more extensive reglazing may need to be arranged separately, and we'll flag this if we see it.
We use appropriate access equipment for the height involved and take the usual safety precautions for working above ground level.
Yes, if you can provide the colour details or a sample, we can match window frames closely to the rest of your trim.
Other services North Shore properties often combine with this one.
Exterior painting that protects North Shore homes from sun, rain and salt air, on any surface.
Explore service →Specialist preparation and repainting for timber weatherboard homes, built to handle moisture and movement.
Explore service →Detailed painting of internal and external doors and frames for a smooth, durable, fingerprint-resistant finish.
Explore service →Crisp, durable painting of skirting boards, architraves, cornices and dado rails for a finished, polished look.
Explore service →A sample of the suburbs where we take on this kind of work.

Devonport is one of Auckland's best-preserved heritage suburbs, with streets of Victorian and Edwardian villas…
Painters in Devonport →
Stanley Point and Stanley Bay form a quiet residential peninsula just around from Devonport's village centre, …
Painters in Stanley Point / Stanley Bay →
Northcote Point is a small, tightly held heritage pocket on a peninsula jutting into the Waitemata Harbour, ri…
Painters in Northcote Point →Whether it's a single room or a full property, we bring the same careful preparation to every window painting job.
Get in touch today for a free, no-obligation quote — we're happy to talk through the scope before you commit to anything.