Exterior House Painting
Exterior painting that protects North Shore homes from sun, rain and salt air, on any surface.
Explore service →
Service
Cleaning, repairing and repainting timber paling, picket and boundary fences so they hold their colour year-round.
Fence Painting Specialists
For Fence Painting North Shore, careful preparation, a suitable coating system and a clearly defined quotation shape the project.
A timber fence sits out in the weather on both sides at once, which is part of why paling and picket fencing tends to fade, crack and lift its coating faster than most other painted surfaces on a property. Front fences take a knock to kerb appeal the moment they start looking patchy, while side and rear boundary fences quietly weather away out of sight until gaps, splits and grey timber are hard to ignore.
Our fence painting service starts with a proper clean and inspection to check for movement, rot or loose palings, followed by sanding or scraping of failed coatings before new paint or stain goes on. We look at the whole fence line - posts, rails and palings - so new and existing sections sit together well rather than looking patchy.
Whether it's a front boundary fence that needs to lift the street presentation of the home, or a side fence that's greyed out over the years, the aim is a consistent, durable finish that holds up to sun, rain and the occasional garden hose on both sides.
Who this is for: This service suits homeowners with timber paling, picket or lattice fencing that has faded, greyed, cracked or started flaking. It's relevant for front boundary fences affecting kerb appeal, side and rear fence lines shared with neighbours, and garden screens or lattice panels across North Shore properties.
A quick look at what's covered when you book this service.
We inspect the fence line for movement, rot and loose palings before any cleaning or coating begins. This assessment identifies which sections need repair, rather than painting over timber that's already failing.
High-pressure cleaning removes dirt, algae and old flaking coating from palings and posts, giving a clean surface to work from. This step is essential preparation before sanding or scraping can properly take effect.
Palings, posts and rails are sanded or scraped to remove failed coatings and smooth the surface for new paint. Consistent preparation across the whole fence line is what prevents an uneven, patchy finished result.
Minor timber repairs and replacement of damaged palings are carried out where needed, addressing problems before they're painted over. This keeps the fence genuinely sound, not just freshly coated on the surface.
A suitable primer or timber conditioner is applied to help the topcoat bond properly to weathered or bare timber. This preparation step matters for how well the finish holds up on both sides of an exposed fence line.
Two coats of exterior paint or stain are applied as chosen, giving durable, even coverage across the whole fence. This layered approach holds up better to two-sided weather exposure than a single coat.
Posts, capping rails and gate frames receive the same careful attention as the palings themselves, rather than being treated as an afterthought. These structural elements matter just as much to the fence's finished appearance and longevity.
We check the finished fence for even coverage and let you know recommended drying times before handing the area back. This advice helps protect the fresh coating from pets, garden hoses or accidental contact while it cures.
Here's what to expect from your first enquiry through to the final coat.
We check the condition of the fence line, note any repairs needed, and discuss finish options before providing a written quote.
Palings and posts are pressure washed to remove dirt and algae, sanded or scraped back where coatings have failed, and any damaged palings are addressed.
Primer or conditioner is applied where required, followed by the chosen paint or stain across palings, rails and posts for a consistent finish.
We check coverage and finish along the whole fence line and let you know recommended drying and re-use times before handing the area back to you.
A few of the things we weigh up when choosing the right product for this job.
Flexible exterior coatings help paint move with palings rather than cracking as timber expands and contracts with the seasons. This flexibility matters given how exposed a fence line is to weather on both sides at once.
Semi-transparent stains let timber grain show through while still offering UV protection, giving a more natural finish than a solid coating. This works well for fences where the timber's character is part of the appeal.
Solid, opaque coatings hide ageing timber and mismatched replacement palings more effectively than a stain, which is useful where some sections have been replaced over time. This helps a fence look consistent even with a mixed repair history.
Breathable coatings help prevent moisture becoming trapped in ground-contact posts, which are more exposed to rising damp than the palings above them. This matters most for posts set directly into soil rather than concrete.
Colour matching helps new and existing fence sections sit together well, rather than replacement palings standing out sharply against weathered timber. This is worth discussing whenever a fence needs partial replacement rather than a full repaint.
A tinted sealer can help even out colour across new and weathered palings before the topcoat goes on, giving a more consistent base to paint over. This extra step reduces how obvious replacement sections look once the fence is finished.
What to expect in terms of timing and access while the work is underway.
Fence work is largely confined to outdoor boundary areas, so it generally has little impact on life inside the house, though gates and access along the fence line may be limited while paint dries. Where a fence is shared with a neighbouring property, we'll talk through timing and access with you so both sides can be reached without disruption to anyone's day.

A few reasons homeowners and property managers choose not to DIY this job.
Split, warped or rotten palings need identifying before painting, rather than coated over and left to fail again soon after. We check the fence line properly and flag which sections genuinely need replacement instead of just a fresh coat.
A long fence line can easily end up with patchy sections if coverage isn't consistent from post to post. We work methodically along the whole run so the finish looks even, not lighter in some spots and heavier in others.
Replacement palings can stand out sharply against older, weathered timber if they're not primed and coated to match properly. We work to bring new sections in line with the existing fence, rather than leaving an obvious patchwork appearance.
Side boundaries and awkward access points, especially on narrower blocks, need careful working practices to reach every paling safely. We plan for tight access before starting, so the job doesn't get rushed or skipped in hard-to-reach sections.
A fence takes weather on both faces at once, which is more demanding than a single-sided wall. We choose coatings suited to that two-sided exposure, so the finish holds up on both the street-facing and garden-facing sides.
Fences shared with a neighbouring property need a bit of coordination around access and timing. We talk through how that's usually arranged so both sides of the fence can be reached without disruption to anyone's day.
Straight answers to the questions we're asked most often about fence painting.
Usually, yes - individual split or badly warped palings can be replaced as needed while sound palings are cleaned and repainted, so you're not paying to replace an entire fence line unnecessarily.
We can, though this is worth agreeing with your neighbour beforehand since it affects access and cost on their side of the fence. We're happy to talk through how that's usually arranged.
New palings are primed and coated alongside the existing fence so the colour and sheen sit together, rather than standing out as an obvious patch.
This depends on the length of the fence line and the amount of preparation needed, but we'll give you a realistic timeframe once we've assessed the fence.
In most cases, yes - failing paint is scraped and sanded back to a sound edge rather than stripped entirely, unless the existing coating has failed extensively across multiple layers.
Other services North Shore properties often combine with this one.
Exterior painting that protects North Shore homes from sun, rain and salt air, on any surface.
Explore service →Cleaning, repairing and recoating timber decks so they hold their colour and stay safe underfoot.
Explore service →Protecting pergola posts, beams and rafters with a durable coating built for overhead sun and weather exposure.
Explore service →Thorough stripping and preparation of failed, multi-layered paintwork on older North Shore homes.
Explore service →A sample of the suburbs where we take on this kind of work.

Murrays Bay is a quieter, family-oriented suburb between Mairangi Bay and Browns Bay, well known locally for i…
Painters in Murrays Bay →
Rothesay Bay is a compact, mostly residential suburb sitting between Murrays Bay and Long Bay, with establishe…
Painters in Rothesay Bay →
Sunnynook is a central North Shore suburb near the main motorway corridor, made up mainly of family homes buil…
Painters in Sunnynook →Whether it's a single room or a full property, we bring the same careful preparation to every fence painting job.
Get in touch today for a free, no-obligation quote — we're happy to talk through the scope before you commit to anything.